PugDashboard - How to Update Your Storage Facility Information

Welcome to our PugDashboard help series. In this series of videos, we walk you through everything you need to know to get the most out of your PugDashboard. 


Hello, this is Matt from StoragePug. Let's go over how to update one of your location's information straight from the PugDashboard. The PugDashboard is where you can have full control of your storage facility's website.  Here you can edit the address for each location along with the gate hours and the office hours. 

When you first come to the location info page you will be landed on your first location. Now if you only have one location that will be the location that's selected for your facility.  If you have multiple locations, like we're using here for example, you'll see that you can select them by clicking the one next to it and you'll notice information changes according to each one.  So let's adjust Killions right here.

So let's say we wanted to edit the address or the tagline, we'll click this edit button right here and a little side bar pops out.  Now if you come over here and I can put "This is my tagline," and I will click update.  It says down here that it was updated successfully; and then we go to the website.  So the tag line was right here, or is still right here, and that's what we changed, that's what it used to say.  So now if I reload the page, you'll see that it now says this is my tagline. 

And so the same can be done with office hours.  So let's say that we decided we're going to close up shop at 2:00 p.m. on Saturdays instead of 5:00 p.m. I can come over here, I just change it down to 2:00 p.m., down here it shows me what it will look like, I click update and then we see that it says successfully updated.  We go over here, this was my old hours, and then when we refresh the new ones will be there.

One thing I did not mention is that you can pick the day that you want it to be on. If it's only for one day like Saturday, put it over here on the left and leave this one at 9:00.  Now if you're going from let's say Monday to Saturday you could do something like that.  Come over here and then we will see our office hours are now from 8:00 a.m. to 2:00 p.m.

Thank you, and if you have any other questions about how to use your PugDashboard or just need to get in touch with us, you can reach out to us through this little messenger down here, we are usually always on it between our office hours on Monday through Friday and you can always schedule an appointment with us on there if we're not there.

Thank you and have a great day.
Was this article helpful?
Thank you!